MagvergeMagverge
ACCELERATOR MAGNET SYSTEM

Accelerator Magnet Systems for Beamline Projects

Configure beamline magnet systems where magnet type, beam path, field quality, aperture, power supply, cooling method and mechanical interface must be reviewed together.

Use this system path for accelerator, beamline, ion-beam and research-facility projects that need project-specific magnetic-field engineering.

Configured accelerator magnet system

beam path, magnet type, field quality and integration route

Beamline function

bending, focusing, steering

Power and cooling

current, load, operation

beam path
N
fieldregion
S
Magnet typeField qualityAperture

Installation interface

aperture, alignment, support

1

Beamline magnet route

dipole, quadrupole, steering or custom magnet type

2

Field and aperture review

field target, field quality, pole gap and beam path

3

Engineering integration

power supply, cooling, support and installation interface

Start from the beamline function, magnet type, field quality, aperture, power supply and installation interface.

Contact us
SELECTION FACTORS

Confirm the Beamline Conditions Before Selecting the Magnet

Accelerator magnet systems should be selected by beamline function, magnet type, field target, field quality, aperture, power supply, cooling method, mechanical interface and control logic.

1

Beamline function

Confirm: bending, focusing, steering, correction or special beamline role

Why it matters: The beamline function defines the magnet type and field geometry route.

2

Magnet type

Confirm: dipole, quadrupole, corrector, solenoid or custom magnet route

Why it matters: Magnet type affects field shape, aperture, pole structure and power needs.

3

Field target

Confirm: field level, field direction, operating mode and stability need

Why it matters: Field target drives coil design, power supply selection and thermal load.

4

Field quality

Confirm: uniformity, gradient, effective length, fringe field and mapping need

Why it matters: Field quality affects beam control, repeatability and acceptance testing.

5

Aperture and pole gap

Confirm: beam aperture, pole gap, vacuum pipe clearance and alignment space

Why it matters: Aperture and gap define working space, magnet size and installation limits.

6

Power supply and ramping

Confirm: current range, ripple, ramp behavior, polarity and control interface

Why it matters: Power behavior must match the magnet load and beamline operating sequence.

7

Cooling and duty cycle

Confirm: air cooling, water cooling, heat load, duty cycle and operating time

Why it matters: Cooling limits stable operation and affects facility utility planning.

8

Mechanical interface

Confirm: footprint, support frame, alignment datum, cable route and safety limits

Why it matters: Interface planning prevents conflicts during installation and integration.

Send the beamline function, magnet type, aperture, field target and interface limits first.

Start Magnet Review
SYSTEM MODULES

Build the Accelerator Magnet System as One Chain

A beamline magnet system combines the magnet body, coil assembly, power supply, cooling route, mechanical support, alignment interface, control logic and acceptance records into one engineered route.

Configured Accelerator Magnet System

beam path and integration route

Configured Accelerator Magnet System

beam path and integration route

Magnet body

beamline magnet route

Coil assembly

current, heat load

Mechanical support

frame, alignment, footprint

Control and protection

interlocks, limits, sequence

Power supply

current, ripple, ramping

Cooling route

air, water, duty cycle

Field verification

mapping, field quality

Installation interface

aperture, cables, utilities

1

Magnet body

dipole, quadrupole, corrector, solenoid or custom field geometry

2

Coil and yoke structure

coil design route, pole shape, yoke layout and thermal load

3

Magnet power supply

current range, ripple, ramp behavior, polarity and communication

4

Cooling and utilities

air or water cooling, duty cycle, heat load and facility connection

5

Mechanical support

base frame, alignment datum, footprint and installation clearance

6

Control and protection

interlocks, operating limits, alarms and control sequence

7

Field verification

field mapping, effective length, field quality and acceptance notes

8

Project handover

drawings, test notes, interface records and shipment checks

Treat the magnet, power supply, cooling route, support frame and control logic as one beamline system.

Discuss System Modules
TYPICAL CONFIGURATIONS

Choose the Accelerator Magnet Configuration Route

Different accelerator magnet configurations support different beamline functions, field geometries, apertures, power supply routes, cooling layouts and installation interfaces.

1

Dipole Magnet System

For beam bending, beam steering or field regions where the magnetic path must be reviewed with aperture and field quality.

Used for: beam bending, steering routes and project-specific beamline layouts

2

Quadrupole Magnet System

For beam focusing projects where gradient requirement, aperture, effective length and alignment conditions must be considered together.

Used for: focusing sections, beam optics routes and accelerator research facilities

3

Corrector / Steering Magnet System

For beam correction, orbit adjustment or fine steering tasks that require compact magnetic-field control and integration review.

Used for: orbit correction, steering control and beamline adjustment modules

4

Solenoid Magnet System

For selected beamline or ion-beam applications where axial field geometry and bore access are part of the project route.

Used for: axial-field beamline sections, ion-beam routes and special focusing needs

5

Custom Beamline Magnet System

For nonstandard aperture, special field shape, restricted installation space or project-specific magnetic-field engineering.

Used for: custom beamline magnets, special inserts and research-facility integration

Configuration logic

Do not choose an accelerator magnet system only by magnet name. Start from the beamline function, field geometry, aperture, field quality, power supply, cooling route and installation interface.

Confirm before selecting

Beamline function and magnet type
Field target, field quality and mapping need
Aperture, pole gap and vacuum-pipe clearance
Power supply, current stability and ramping route
Cooling method, duty cycle and facility utilities
Footprint, alignment datum and installation limits

Configuration note

If the route is uncertain, send the beamline function and aperture first.

If the configuration route is unclear, start with the beamline function, magnet type, aperture and field quality requirement.

Discuss Configuration
ENGINEERING & TESTING

Engineering Review Before Beamline Magnet Delivery

Testing should verify the magnetic-field section, power load, cooling condition, aperture, alignment interface and acceptance records that affect beamline operation.

Accelerator magnet test flow

Project conditions define what should be checked before shipment and handover.

1Requirement baseline
beamline function, aperture, field quality
2Magnet and interface check
magnet type, support, alignment route
3Field verification
field target, effective length, mapping notes
4Power and cooling review
current load, ripple, heat removal
5Acceptance record
test scope, notes, handover
1

Field quality verification

Covers: field target, field distribution, effective length, fringe field and mapping need

Record: field verification note or mapping record when required

2

Aperture and alignment review

Covers: beam aperture, pole gap, vacuum-pipe clearance, support frame and alignment datum

Record: aperture and installation-interface check

3

Power and load check

Covers: current range, ripple, ramp behavior, polarity, communication and magnet load

Record: power supply and load-matching review

4

Cooling and duty cycle

Covers: air cooling, water cooling, heat load, operating time and facility utilities

Record: cooling condition and operation review

5

Control and safety logic

Covers: interlocks, operating limits, alarms, cable route and controlled shutdown

Record: control and protection logic review

6

Acceptance documents

Covers: agreed test scope, buyer notes, drawings, shipment checks and handover details

Record: FAT checklist or project-specific record

Testing items should follow the beamline project scope, not a generic magnet checklist.

Discuss Testing Requirements
INQUIRY CTA

Send an Accelerator Magnet System Inquiry

Share the beamline function, magnet type, aperture, field quality, power supply, cooling method and installation limits so the magnet route can be reviewed before quotation.

Start with the beamline task.

A useful inquiry describes what the magnet must do in the beamline, how the beam passes through the field region and what installation limits the facility must follow.

Project route to review

1Beamline function and magnet type
2Aperture, pole gap and beam path
3Field target and field quality
4Power supply, cooling and duty cycle
5Support, alignment and installation limits

Information to include in the inquiry

The inquiry does not need to be complete. Send the known beamline conditions first, and missing items can be reviewed during engineering discussion.

1

Beamline function

bending, focusing, steering, correction or custom beamline role

2

Magnet type

dipole, quadrupole, corrector, solenoid or custom magnet route

3

Aperture and clearance

beam aperture, pole gap, vacuum pipe and working clearance

4

Field requirement

field target, field quality, effective length and mapping need

5

Power and cooling

current range, ripple, ramping route, cooling method and duty cycle

6

Installation interface

footprint, alignment datum, support frame, cable route and utility limits

Ready to review an accelerator magnet route for your beamline project?

Send Magnet Requirement