Beamline and Accelerator Magnetic Field Projects
Use this application path when a beamline, accelerator, light-source or experimental station project needs a project-specific magnetic field source rather than a standard catalog instrument.
The system path may involve accelerator magnets, electromagnets, magnet power supplies, cooling design, mechanical interfaces and project-specific acceptance records depending on the field profile and installation conditions.
Application path
Start from the required field profile, beam path, mechanical envelope and interface conditions before selecting the magnet, power supply and support modules.
beam path + magnetic field source
Field target
field profile, field quality, aperture, repeatability and operating mode
Interface conditions
beam path, mechanical envelope, cooling route, power and control interface
System path
Accelerator Magnets / Electromagnets / Power Supplies / Cooling Integration
If the project route is not fixed yet, send the field target, beam path and known interface conditions first.
Send Project ConditionsConfirm the Target Field and Project Conditions
A useful beamline or accelerator magnet inquiry should define the required field behavior and the project interfaces that affect magnet structure, power, cooling and acceptance.
Core project inputs to prepare
Field target
field type, field profile, operating mode and repeatability
Beam path
aperture, clearance, alignment route and installation envelope
Magnet geometry
pole shape, gap, coil layout and mechanical constraints
Power and cooling
current demand, stability, duty cycle and heat removal route
Control interface
signal path, interlock logic, software or existing system connection
Acceptance record
field mapping, test notes and handover scope
Field profile
Confirm: required field type, profile shape, uniform area, repeatability and operating mode.
Why it matters: Field behavior defines magnet geometry, pole design and power route.
Beam path and aperture
Confirm: beam path, aperture, clearance, alignment reference and available envelope.
Why it matters: Mechanical limits affect magnet opening, frame design and installation feasibility.
Power supply route
Confirm: current range, stability, ripple, sweep mode, protection and communication.
Why it matters: Power behavior affects field stability, repeatability and control integration.
Cooling condition
Confirm: air, water or project-specific cooling route, heat load and duty cycle.
Why it matters: Cooling affects operating time, coil design, installation space and safety margin.
Control and safety
Confirm: interlocks, emergency stop, remote control, signal interface and status feedback.
Why it matters: Beamline projects usually require clear integration with site control logic.
Acceptance criteria
Confirm: field mapping, FAT scope, inspection notes and project handover requirement.
Why it matters: Acceptance records help confirm that the supplied system matches the project scope.
Send the known field target, beam path, aperture, power route and interface conditions first.
Send ConditionsMatch Project Conditions to a Magnetic System Route
The recommended route should connect the field target, beam path, mechanical envelope, power supply, cooling and acceptance scope. Beamline and accelerator projects are usually configured as a system path, not a single catalog product.
Project route logic
Start from the field and interface conditions, then decide which modules must be combined.
Field target
profile + quality
Beam path
aperture + envelope
Power route
stability + sweep
Cooling route
heat load + duty cycle
Acceptance scope
mapping + handover
Engineering path
review
Magnet structure
dipole, quadrupole, steering or custom geometry
Power and control
power supply, sweep, interlock and signal route
Cooling and records
cooling design, field mapping and acceptance
Dipole / bending route
Route: Accelerator Magnet System + power supply + cooling route
Use: For beam bending or defined field-region projects.
Quadrupole / focusing route
Route: Accelerator Magnet System + mechanical alignment + field mapping
Use: For focusing or gradient-field requirements.
Steering / correction route
Route: Compact magnet module + stable power supply + control interface
Use: For beam steering, correction or adjustment tasks.
Custom electromagnet route
Route: Electromagnet + custom pole / aperture + power and cooling review
Use: For non-standard beam path or fixture constraints.
Superconducting route
Route: Superconducting Magnet System + cryogenic path + protection logic
Use: For high-field or cryogenic project conditions.
Integration route
Route: Magnet, power, cooling, control and acceptance documentation
Use: For projects that require coordinated delivery.
Field target
Beam path
Magnet route
Power / cooling
Acceptance review
If the system path is unclear, send the field target, beam path and interface conditions for review.
Review Related SystemsSend a Beamline or Accelerator Magnet Requirement
Share the field target, beam path, aperture, mechanical envelope, power route, cooling condition and acceptance expectation. A complete project specification is not required at the first inquiry.
Inquiry review focus
The first review should confirm the magnet route, power supply, cooling method, control interface, installation limits and acceptance scope.
Information to include
Send the known project values first. Missing items can be reviewed later.
Field target
field type, profile, aperture, stability, repeatability and operating mode.
Beam path
beam route, clearance, alignment reference and available installation envelope.
Magnet and power
magnet type, current route, sweep mode, ripple and protection requirement.
Cooling and control
cooling method, heat load, duty cycle, interlock and signal interface.
Acceptance scope
field mapping, FAT items, inspection notes and handover requirement.
What happens after the inquiry
The response should be based on project review, not only a product name.
Requirement check
review field target, beam path, interface conditions and acceptance scope
System direction
identify the magnet route, power supply, cooling and control interface
Configuration review
confirm modules, geometry, installation limits, protection and open questions
Quotation preparation
prepare a practical quotation scope after key project conditions are clear
Good first inquiry
field target + beam path + aperture + interface conditions
Useful attachment
layout drawing, magnetic field target, installation envelope or control requirement
If unsure
send the known values and mark the uncertain items clearly
Send the known beamline field target, beam path and project interface conditions for engineering review.
Contact Engineering